| Double
Acting Quick Release Pins |
| Steel 2 ball quick release
pin
Imperial dimensions up to 1/2 inch
diameter |
 |
| Steel 2 ball quick release
pin
Imperial dimensions up to 1 inch
diameter
Metric dimensions up to 20mm diameter |
 |
| Stainless Steel (17-4PH) 2 ball quick
release pin
Imperial dimensions up to 1 inch
diameter
Metric Dimensions up to 25mm diameter |
 |
| Single
Acting Quick Release Pins |
| T Handle, 2 ball, shank in
steel or stainless steel, handle in aluminium |
 |
| Ring Handle, single action 2 ball pin - all stainless
steel |
 |
| Ring Handle quick release
pin, Aluminium
button, steel shank |
 |
| Button Handle quick release pin - aluminium handle with
steel or stainless steel shaft. Heavy duty release pin version with a
stainless steel handle. |
 |
| L Handle quick release pin - aluminium handle, steel or
stainless steel shaft. |
 |
| GT pin T Handle quick
release pin in all
stainless steel. |
 |
|
Alignment
Detent Pin - Non Locking |
| Stainless Steel Shouldered
pin - 2 ball AISI 431 |
 |
| Stainless Steel pin - 2 ball
detent pin (316 stainless steel) |
 |
| Stainless Steel (303 series)
2 ball, shouldered |
 |
| Steel plated detent pin - 1
ball |
|
| Steel plated detent pin, 2 ball, shouldered
|
 |
| Spring
Loaded Plunger Pin |
Plunger pins are located by external threads into a
component and the pin is disengaged be pulling against a spring to pull
back. |
 |
| Drop
Nose Pin |
Drop nose pin in stainless
steel (316 stainless steel), to install, the latch is turned through 90°
to locate into place. Standard finger pull head
|
|
| Drop nose pin in zinc plated steel, non locking latch,
spring loaded body to retain tension. Supplied with retaining chain. |
 |
| Wire
Lock Pin |
| Wire Lock pins are retained by a hard spring wire loop
that passes around a shaft and loops over the pin shaft |
 |
| Safety Pin |
| Engineering safety pin, steel plated sprung wire |
 |
| Linch Pin (lynch pin) |
| Steel pin with an offset loop to induce a spring loaded
ring. Used to secure hitch pins and simple clamping to retain in place.
Variations on name of lynch pin or linch pin. |
 |
