Nylon Lanyards
Nylon lanyards offer a very lightweight and flexible alternative to
traditional wire lanyards. This low-cost alternative to wire lanyards offers
light-duty retention and loss prevention.
Made from "Super Tough" ST801 Zytel Nylon
with an approximate break strength of 30lbs.
Manufactured with a patented 'u-lock' to create the loop to one end or
with both ends pre-moulded.
One end is a loop, supplied open. Attach to the
component, then "snap" together!
The loop is permanently locked.
Available with either a moulded loop (type 1) or
eyelet (type 2) on the other end.
Stocked in 10" (assembled) lengths.
The type 1 lanyard provides a useful loop to attach to a split ring and
allows the U lock end to be passed around or through a locating
position. Alternatively, the U -Lock end can be passed through the loop
or located to a fixed point.
Prices from £0.95p each excluding carriage and VAT
| |
A |
B |
C |
D |
E |
F |
G |
H |
|
|
NL93-10-100 (Type 1) |
0.093" |
8" |
4" |
0.5" |
- |
- |
0.34" |
1.5" |
10" |
| |
|
|
|
|
|
|
|
|
|
|
NL93-10-220 (Type 2) |
0.093" |
8" |
4" |
0.5" |
0.473" |
0.20" |
- |
- |
10" |