Drop Nose Pin - Steel
Traditionally referred to as a sword pin or toggle pin, the brass latch on this type of drop nose pin is rotated manually
for removal and insertion, the latch itself is not locked and therefore should only be used on solid section.
The steel body has a spring fitted to maintain the tension to keep the assembly located, and a chain lanyard with tab fitted to the head. Only suitable for use through solid sections, not suitable for hollow sections
as the latch is not fixed when in line with the pin when inserting or removing.
Available in 10mm and 12mm diameters.
Prices from £5.90 each ex vat and carriage
Supplied with a 240mm steel chain lanyard and fixing tab.
Drop nose Pin
Standard Sizes (approximate)
Note When turning the latch, this encroaches approximately
10mm-12mm into the body length (A) as it turns.
|
|
Dia B | Length A | Spring C | Code |
| 10mm | 63mm | 35mm | 206/63 | |
| 10mm | 73mm | 35mm | 206/73 | |
| 12.5mm | 90mm | 42mm | 206/90 | |
| 12.5mm | 100mm | 42mm | 206/100 |
